Autel Key Programming Tool Autel MaxiIM IM608 Pro upgrade version IM608 II is the most advanced and smart key programming android tablet dignosis tool. Compare to Autel IM608 Pro/ IM608 has great improvement in hardware and software, the perfermance of IM608 II is more competitive.
XP400 PRO & PLUS GBOX2 & APB112 BUNDLE
XP400 Pro is an advanced All-in-One key programmer.
Pros of XP400 Pro:
- More stable of read/ write key
- Extended IMMO functions on BMW/ BENZ and Audi etc. It supports Data Read/ Write of 3,000 Plus Types. XP400 Pro will read PIN, key learning remote learning, key generation, IMMO ECU reset/adaptation/refresh/coding, IMMO data backup. This bundle is the most cost-effective choice for workshops.
FULL BI-DIRECTIONAL CONTRAL/ACTIVE TESTS
Autel IM608 II bidirectional control scanner can perform Active Tests to request information or command an actuator to perform specific tests, such as turning the vehicle fuel pump on and off, cycling the a/c clutch on and off, performing an evaporative emissions leak test, fast solution to your vehicle defective parts and components, not simply by reading codes.
ADVANCED ECU CODING SAME AS MK906BT/MS906BT
Autel IM608 II diagnostic tool can perform advanced ECU Coding same as Autel Elite/ Elite 2/ MS908S PRO/ MS908/ MK908/ MK908P/ MK906BT/ MS906BT. ECU Coding function enable you to disable the automatic Start-Stop, customize the daytime running lights, and set the speed to show in the digital display below the speedometer, tuning the start the engine time, tuning the oil injection for Vehicle, flash hidden function, and so on. You need to input the data manually.
2 YEAR FREE UPDATE, DATA/REPORT RECORD & PRINT, LIFETIME TECHNICAL SUPPORT You will never walk/work alone. We would be honored if we could have you come on board. Alone with a 2-year free update, 1-year warranty, and lifetime technical support, IM608 II will be the great key programming scan tool you've ever had. 💡NOTE: From August 1, 2022, purchased and registered IM608 Pro comes with two years of free updates.
OE-LEVEL FULL SYSTEMS DIAGNOSTICS & 35+ SERVICES
IM608 II auto key fob can perform 35+ service functions such as Oil Reset, ABS, SRS, SAS, D-P-F, EPB, Battery Registration, Brake Reset, Vehicle Injector Coding, Key Fob Coding, fully meeting your needs. IM608 Pro automotive diagnostic scanner with OE-Level all systems diagnosis same as Autel MS908S Pro II & MK908P II. It can access all available vehicle modules for more than 80 US, Asian and European makes and models.
AUTOAUTH FOR FCA SGW
The Autel IM608 II diagnostic scanner has been upgraded to be able to fully access protected FCA vehicles! Autel IM608 Pro is compatible with 2017 & later FCA cars (Chrysler, Dodge, Jeep, Alfa Romeo, Fiat, etc.) to perform full systems diagnostics codes, bi-directional control, and active tests, ECU Coding, even more.
||Qualcomm SDM660 Octa-core Processor (2.2GHz )
||4GB RAM &128GB On-board Memory
||10.1-inch LED capacitive touchscreen with 1920x1200 resolution
|SD Card (Support up to 64GB)
||Light sensor for brightness auto adjust
|Power and Battery
||15000 mAh 3.8 V lithium-polymer battery Charging via 12 V AC/DC power supply with the temperature between 0°C and 45°C
||12V (9-24 V)
||0 to 50°C (32 to 122°F)
||-20 to 60°C (-4 to 140°F)
||300 mm (11.81”) x 220 mm (8.66”) x 50 mm (1.97”)
||NW: 1.58 kg (3.48 lb.)
||ISO 9142-2, ISO 14230-2, ISO 15765-4, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, CAN ISO 11898, Highspeed, Middlespeed, Lowspeed and Singlewire CAN, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP 2.0, TP 1.6, SAE J1939, SAE J1708, Fault-Tolerant CAN