Autel MaxiIM IM608 II Key Programming Tool, Upgraded of IM608, ECU Coding, BiDirectional Control, 2 Years Free Update, 35 + Service, Combo with XP400 Pro & Gbox2 & APB112

$3,350.00
Autel Key Programming Tool Autel MaxiIM IM608 Pro upgrade version IM608 II is the most advanced and smart key programming android tablet dignosis tool. Compare to Autel IM608 Pro/ IM608 has great improvement in hardware and software,  the perfermance of IM608 II is more competitive.  Features XP400 PRO & PLUS...
Item :
$3,350.00

Autel Key Programming Tool Autel MaxiIM IM608 Pro upgrade version IM608 II is the most advanced and smart key programming android tablet dignosis tool. Compare to Autel IM608 Pro/ IM608 has great improvement in hardware and software,  the perfermance of IM608 II is more competitive. 

Features

XP400 PRO & PLUS GBOX2 & APB112 BUNDLE

XP400 Pro is an advanced All-in-One key programmer.

Pros of XP400 Pro:

  • More stable of read/ write key
  • Extended IMMO functions on BMW/ BENZ and Audi etc. It supports Data Read/ Write of 3,000 Plus Types. XP400 Pro will read PIN, key learning remote learning, key generation, IMMO ECU reset/adaptation/refresh/coding, IMMO data backup. This bundle is the most cost-effective choice for workshops.


FULL BI-DIRECTIONAL CONTRAL/ACTIVE TESTS

Autel IM608 II bidirectional control scanner can perform Active Tests to request information or command an actuator to perform specific tests, such as turning the vehicle fuel pump on and off, cycling the a/c clutch on and off, performing an evaporative emissions leak test, fast solution to your vehicle defective parts and components, not simply by reading codes.


ADVANCED ECU CODING SAME AS MK906BT/MS906BT

Autel IM608 II diagnostic tool can perform advanced ECU Coding same as Autel Elite/ Elite 2/ MS908S PRO/ MS908/ MK908/ MK908P/ MK906BT/ MS906BT. ECU Coding function enable you to disable the automatic Start-Stop, customize the daytime running lights, and set the speed to show in the digital display below the speedometer, tuning the start the engine time, tuning the oil injection for Vehicle, flash hidden function, and so on. You need to input the data manually.


2 YEAR FREE UPDATE, DATA/REPORT RECORD & PRINT, LIFETIME TECHNICAL SUPPORT You will never walk/work alone. We would be honored if we could have you come on board. Alone with a 2-year free update, 1-year warranty, and lifetime technical support, IM608 II will be the great key programming scan tool you've ever had. 💡NOTE: From August 1, 2022, purchased and registered IM608 Pro comes with two years of free updates.

OE-LEVEL FULL SYSTEMS DIAGNOSTICS & 35+ SERVICES

IM608 II auto key fob can perform 35+ service functions such as Oil Reset, ABS, SRS, SAS, D-P-F, EPB, Battery Registration, Brake Reset, Vehicle Injector Coding, Key Fob Coding, fully meeting your needs. IM608 Pro automotive diagnostic scanner with OE-Level all systems diagnosis same as Autel MS908S Pro II & MK908P II. It can access all available vehicle modules for more than 80 US, Asian and European makes and models.


AUTOAUTH FOR FCA SGW

The Autel IM608 II diagnostic scanner has been upgraded to be able to fully access protected FCA vehicles! Autel IM608 Pro is compatible with 2017 & later FCA cars (Chrysler, Dodge, Jeep, Alfa Romeo, Fiat, etc.) to perform full systems diagnostics codes, bi-directional control, and active tests, ECU Coding, even more.

Specifiction

Operating   System Android 10
Processor Qualcomm SDM660 Octa-core Processor (2.2GHz )
Memory 4GB RAM &128GB On-board Memory
Display 10.1-inch LED capacitive touchscreen with 1920x1200 resolution
Connectivity Wi-Fi(802.11a/b/g/n/ac)
USB 2.0
SD Card (Support up to 64GB)
Sensors Light sensor for brightness auto adjust
Power and Battery 15000 mAh 3.8 V lithium-polymer battery Charging via 12 V AC/DC power supply with the temperature between 0°C and 45°C
Input Voltage 12V (9-24 V)
Power Consumption 6.5W
Operating Temp 0 to 50°C (32 to 122°F)
Storage Temp -20 to 60°C (-4 to 140°F)
Dimensions(WXHX D) 300 mm (11.81”) x 220 mm (8.66”) x 50 mm (1.97”)
Weight NW: 1.58 kg (3.48 lb.)
Protocols ISO 9142-2, ISO 14230-2, ISO 15765-4, K/L-Line, Flashing Code,   SAE-J1850 VPW, SAE-J1850 PWM, CAN ISO 11898, Highspeed, Middlespeed, Lowspeed   and Singlewire CAN, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol,   TP 2.0, TP 1.6, SAE J1939, SAE J1708, Fault-Tolerant CAN
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Autel MaxiIM IM608 II Key Programming Tool, Upgraded of IM608, ECU Coding, BiDirectional Control, 2 Years Free Update, 35 + Service, Combo with XP400 Pro & Gbox2 & APB112
You have successfully subscribed!
This email has been registered
ico-collapse
0
Recently Viewed
ic-cross-line-top
Top
ic-expand
ic-cross-line-top