MaxiIM IM508 is a fast, easy-to-use, and ultraportable immobilizer and key programming device. The Android-based touchscreen tablet features powerful quad-core processor, intuitive design and straight-forward interface. Key Programming + All Systems Diagnostics + 22 Advanced Servies all in one. Smart Mode for guiced & automated Key learning, Expert Mode for advanced key learning Powerful OE-Level diagnostic scan tool & IMMO features for higher USA/ Asian/ European Coverage Equipped with the XP200 key programmer, IM508 is capable of providing extraordinary service functions for the immobilizer system. Together with the ability to quickly diagnose all modules of the majority of makes and models on the market, IM508 provides you with special functions. IM508 is the good solution for shops and technicians who demand affordable and powerful IMMO and diagnostic services.
Autel MaxiIM IM508 / IM608, Updated version of Auro OtoSys IM100/IM600.
IMMO Application -- Provides Smart Mode and Expert Mode to guide technicians performing IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, etc.
Programming Application -- Requires connection between the tablet and the XP200, no vehicle connection is required. This application can access the key chip, read/retrieve/write key information, as well as other key related functions.
Diagnostics Application -- Retrieves ECU information, read & erase DTCs and view live data. This function can access the electronic control unit (ECU) for various vehicle control systems, including engine, transmission, ABS, airbag system (SRS) and more.
Service Section -- Specially designed to provide you with quick access to the vehicle systems for various scheduled service and maintenance performances. The typical service operation screen is a series of menu driven executive commands. By following the on-screen instructions to select appropriate execution options, enter correct values or data, and perform necessary actions, the system will guide you through the complete performance for various service operations.
Autel MaxiIM IM508 support automotive protocols: ISO9141-2, ISO14230-2,ISO15765, K/L Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898(Highspeed, Middlespeed, Lowspeed and Singlewire CAN,fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6
- Powerful Cortex-A9 processor
- 7”1024x600 LCD capacitive touchscreen
- Internal reliable 32GB Memory
- Android Operating System for fast boot-up and multitasking
- Powerful combination of key programming/all system diagnostics/advanced maintenance services
- Smart Mode for guided and automated key learning
- Expert Mode for advanced key learning
- Read PIN/CS (all key lost) , key generation, key learning, remote learning
- IMMO ECU reset/adaptation, refresh/coding
- Transpronder read/write, EEPROM/MCU read/write
- Powerful OE level diagnostics for more than 80 US, Asian and European makes and models
- Advanced maintenance services including EPB, DPF, SAS, Oil reset, BMS and TPMS sensor ID relearn
- NEW! Support active test and complete special functions
||Android™ 4.4.4, KitKat
||Cortex-A9 processor(1.6 GHz)
||7-inch LCD capacitive touchscreen with 1024x600 resolution
- Mini USB 2.0
- Micro SD card slot(supports up to 32GB)
||Ambient light sensor for brightness auto changing
|Power and Battery
- 3.7 V/5000 mAh lithium-polymer battery
- Charges via 5 VDC power supply
|Tested Battery Life
||Around 4.5 hours of continuous use
|Battery Charging Input
||500 mA (LCD on with default brightness, Wi-Fi on)@3.7 V
||0 to 50°C (32 to 122°F)
||-20 to 60°C (-4 to 140°F)
|Supported Automotive rotocols
||ISO9141-2, ISO14230-2,ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW,
SAE-J1850 PWM, ISO11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6